MultiPSK

[RW6AVK]

MultiPSK last version (http://f6cte.free.fr/index_anglais.htm) 4.48.6

HELP Files (http://f6cte.free.fr/Help_PDF.ZIP)

4295

https://groups.io/g/multipsk/topic/multipsk_4_48_6_test_version/107669721

This test version 7 proposes a possibility to export a QSO towards a WEB server via UDP: http://f6cte.free.fr/MULTIPSK_4_48_6_test_version_7.zip

Paste this address in your Internet Explorer or equivalent. Download the file.
Extract the ZIP file and replace the “official” Multipsk.exe. Before, make a copy of the “official” Multipsk.exe. It is also proposed new help manuals (chm files).

Exporting a QSO via UDP to a WEB server
It is given the possibility to export a QSO towards a WEB server via UDP, while recording a QSO (by pushing on the "QSO->Log" button or on the "DXKeeper" button). Afterwards, for example for the udp.rdrclub server, the activity (spots) can be seen here: https://udp.rdrclub.ru/
To use this function, look at this document: в сообщении #3 этой темы.



Phase Shift Keying modes:
BPSK: BPSK31-63-125-250 / CHIP (64/128) / PSK10 / PSKFEC31 / PSKAM10-31-50 / PSK125R-250R-500R
BPSK with SSTV: PSK63 F - PSK220F + DIGISSTV "Run"
QPSK: QPSK31-63-125-250
8PSK: VDL2
MPSK: MT63
PACKET BPSK1200-250-63-31 + APRS+ DIGISSTV "Run"
MIL-STD-188-110A - 4285
HFDL
EPIRB-ELT-PLB beacons
ARGOS (beacons/satellites)
AUTEX
ORBCOMM
AERO
EGC
M10/M20
LRPT
On-Off Keying Modes: CW / NDB / CCW-OOK / CCW-FSK / QRSS
Amplitude modulation mode: APT faxes (NOAA satellites)
Frequency Shift Keying modes:
PACKET: 110-300-1200 bauds + APRS+ DIGISSTV "Run"
PACTOR 1 / AMTOR FEC-Navtex / AMTOR ARQ / SITOR A
ASCII / RTTY 45-50-75-100-110-150-200 / SYNOP + SHIP / IEC 870-5
1382 / BIIS / GMDSS DSC / ATIS / ACARS (VHF) / DGPS / NWR SAME / ARQ-E / ARQ-E3
RS41(GFSK)
DFM06-09
LMS6
Multi Frequency Shift Keying modes:
MFSK8 / MFSK16/32/64 (+SSTV)
OLIVIA / Contestia / RTTYM / VOICE
THROB/THROBX
DominoF / DominoEX / THOR
PAX / PAX2
Automatic Link Establishment (see http://www.hflink.com) MIL-STD-188-141A+
ARQ FAE / ALE400 + ARQ FAE
DTMF, SELCAL
JT65 (A B and C)
LENTUS
COQUELET
(RS ID / CALL ID)
EM
FT4, FT8, WSPR
Base band modes: POCSAG, AIS, Packet 9600 bauds (G3RUH), DSTAR, C4FM, DMR, P25
Hellschreiber modes: FELD HELL / FM HELL(105-245) / PSK HELL / HELL 80
Graphic modes: HF FAX / SSTV (+QR Code) / PSK SSTV modes (mentioned above) / MFSK16 SSTV (mentioned above)
PPM (by positioned pulses) modes: mode S (ADS-B included)
DSP modes: Filters / Analysis / Binaural CW reception
RTTY, CW, BPSK31, BPSK63 and PSKFEC31 Panoramics
Identifiers: Video ID / RS ID / Call ID
TCP/IP digital modem
Integered SdR demodulator/modulator

[RW6AVK]

Вопрос к пользователям этого софта - есть ли какой-либо "механизм" отправки (трансляции) занесенного в лог QSO посредством UDP/TCP?

В мануале есть только краткая глава "Use of the Multipsk logbook and logging of an external logbook (DXKeeper...)" [стр. 993]

[RW6AVK]

Patrick, F6CTE реализовал в Multipsk (https://groups.io/g/multipsk/topic/multipsk_4_48_6_test_version/107669721) отправку QSO на внешние сервера. По ссылке есть pdf (англ) файл (http://f6cte.free.fr/Exporting_a_QSO_via_UDP_to_a_WEB_server.pdf) с описанием как это сделать. В очередном релизе этот хелп сильно не изменится.

[RW6AVK]

New release of MULTIPSK 4.48.6 (https://groups.io/g/multipsk/topic/new_release_of_multipsk/107827915)